User Manual

3
−
16
Procedure for Periodic Measurement
1. Press the NIBP parameter key on the home display.
The NIBP setup menu will be displayed.
2. Press the Auto Mode key on the NIBP setup menu.
The interval time setup menu will be displayed.
3. Select an interval time.
Press the key for the desired interval. Check that
the key LED is lighted for the selected interval.
The measurement will automatically start at the
selected interval.
The measurement time will be integral multiple of the selected interval time starting from 0 minute.
Ex.) If the present time is 13:14, the measurement time will be as follows for each interval time.
2 min. : 13:16, 13:18, 13:20, …
2.5 min. : 13:15, 13:17:30, 13:20, …
3 min. : 13:15, 13:18, 13:21, …
．
5 min. : 13:15, 13:20, 13:25, …