User's Manual

−

To Suspend Monitoring

When not monitoring for a while, turning OFF the power will erase the recall data, ST

measurement, OCRG data.

However, using the cease monitoring function allows suspension of data measurement, alarm

generation, automatic measurement, automatic recording without erasing the data or setup

details.

1. Press the Cease

key on the admit / discharge menu.

Press the Menu

→

Admit / Discharge

→

Cease key.

2. Suspend monitoring.

Pressing the OK key on the confirmation

display will interrupt monitoring.

Pressing the Cancel

key will return to the

previous display.

3. Verify that the monitoring is suspended.

The Resume key will be displayed on the

home display. On the home display, numeric

data and waveform display will be ceased, and

all the key operation except the Resume

key will become ineffective.

NOTE

The telemetry transmission will cease when monitoring is suspended.

(for DS-7141, DS-7101LT)

Note that the square wave will be displayed on the central monitor indicating the

too far condition of the telemetry.

Basic Operation