User Manual

4
−
17
To Set the User Keys
Program the key function to each user key.
1. Press the Menu
→
System Config.
→
Pre-Set
→
Ward Setup
→
User Key
keys.
The user key setup menu will be displayed.
2. Select a position to set the user key.
Press the key for the position to set the user key.
3. Select a parameter for the user key.
Press the key for the parameter to be set as user key.
User Key Function
Alarm Silence Silences the alarm for fixed amount of time.
Alarm Displays alarm setup menu.
Admit / Discharge Displays admit/discharge menu.
Rec. START/STOP Starts/stops manual recording.
Key Lock
Turns ON/OFF the touch key operation.
This function can be used to make the touch key inoperative
when cleaning the screen.
Cease
Displays the confirmation display whether to suspend monitoring
or not.
NIBP List Displays NIBP list.
Graphic Trend Displays graphic trend.
Tabular Trend Displays tabular trend.
Recall Displays recall.
OCRG Displays OCRG.
Enlarged Display Enlarges the numeric data display.
User Key 1 User Key 2 User Key 3 User Key 4
4
Key Setup