User Manual

4
−
20
− Recording Setup − To Record the Waveform and Numeric Data
On the DS-7100 system, the waveform recording by manual recording, periodic recording, alarm
recording, or freeze recording, and graphic recording of graphic trend, tabular trend can be
performed.
This section describes the procedure for the following recording.
・
Manual Recording
・
Periodic Recording
・
Alarm Recording
・
Freeze Recording
・
Graphic Recording (Graphic Trend, Tabular Trend, Recall, NIBP List)
Manual Recording
● To Start / Stop the Recording
For manual recording (standard recording), pressing the Rec. START/STOP
key will start /
stop the recording. Pressing this key during periodic recording, alarm recording, or graphic
recording will cease the recording in process.
Not recording Recording in process
● To Set the Manual Recording
The manual recording can be started from the time the key is pressed, or 8 sec. / 16 sec. prior to
the time the key is pressed.
The recording can be set to automatically stop after 24 seconds or continue to record until the
Rec. START/STOP
key is pressed again.
1. Press the Menu
→
System Config.
→
Record
→
Manual Record
keys.
The manual recording setup menu will be displayed.
Starts the standard recording.