User Manual

4
−
21
2. Select the waveform for recording.
Up to 3 waveforms can be selected.
The waveforms will be automatically located at
recording.
3. Select the duration for recording.
Select the recording duration from 24sec or
Cont. .
24sec
will automatically stop the recording after 24
seconds.
4. Select the delay time for recording.
None will start the recording from the time the
Rec. START/STOP
key is pressed.
8sec , 16sec will start the recording 8 sec. / 16
sec. prior to the time the key is pressed.
Periodic Recording
The recording will be automatically performed with the selected interval. Periodic recording can
be performed on the central monitor connected on the wired network system.
1. Press the Menu
→
System Config.
→
Record
→
Periodic Record
keys.
The periodic recording setup menu will be displayed.
2. Select the waveform for recording.
Up to 3 waveforms can be selected.
The waveforms will be automatically located at
recording.
3. Select the periodic interval.
Select the periodic interval to automatically start the
recording.
If 5min
is selected, the recording will be started at
time such as 10:00, 10:05,
・・
10:25.
If 60min
is selected, the recording will be started
at time such as 10:00, 11:00, 12:00.
4. Select the recording duration.
Select the recording duration from 6 sec , 12 sec ,
24 sec .
The recording will automatically stop after the
selected time.
4
Recording Setup