User Manual

4
−
27
− Volume Setup − Pulse Tone, Alarm Sound, etc.
This menu allows volume setup of the pulse tone, alarm sound, key sound and other bed alarm
sound.
1. Press the Menu
→
Tone / Volume
keys.
The volume setup menu will be displayed.
＜
Volume Setup Menu
＞
2. Set the volume for the pulse tone.
The volume of the HR synchronized tone, SpO
2
synchronous tone, BP synchronized tone can be
adjusted.
3. Set the volume for alarm sound.
The volume of the numeric alarm, arrhythmia alarm,
equipment status alarm can be adjusted.
CAUTION
A faint sound will be generated when setting a minimum volume for the
alarm sound, but be cautious not to miss any alarm. Adjust the volume to
a recognizable level.
4. Set the volume for key sound.
The volume of the key sound can be adjusted.
5. Set the volume for other bed alarm sound.
The other bed alarm sound can be adjusted.
6. Set the volume for other sound.
The volume of the sound which notifies the
completion of BP zero balance, NIBP measurement,
etc. can be adjusted.
Increases the volume.
Current volume
Decreases the volume
Tests the set volume.
4
Volume Setup