User Manual

4
−
30
− Telemetry Setup − （DS-7141, DS-7101LT）
This section explains the setup of telemetry transmitting channel.
The DS-7141 and DS-7101LT incorporates a telemetry transmitter.
Once the transmitting channel ID and group ID are programmed, these will remain stored even
after the main power is turned OFF.
The telemetry function is not supported for the DS-7101L.
1. Press the Menu
→
System Config.
→
Pre-Set
→
Hospital Setup
→
Telemeter Setup
keys.
＜
Telemetry Setup Menu
＞
2. Select ON/OFF of telemetry.
OFF
will not perform telemetry transmission. The
channel ID on the home display will be displayed as
“ch OFF”
To perform telemetry transmission, select ON .
3. Enter the password.
Press the Password key, and enter the password.
Use the numeric keypad to enter the password
The entered number will be displayed as “
＊＊＊＊
”
.
4. Enter the channel ID.
Press the Channel key, and enter the channel ID.
Use the numeric keypad to enter the 4-digit medical
telemetry channel ID.