User Manual

4
−
38
Alarm Pole Flash Pattern Setup
This function sets the alarm pole flash pattern for each alarm.
1. Press the Pattern Setup key on the alarm pole setup menu.
The alarm pole flash pattern setup menu will be
displayed.
2. Select the flash pattern for each item.
First, select the flash pattern from Pattern 1 to
Pattern 10 .
The alarm pole consists of 3 blocks.
(Left: Red, Center: Red/Orange/Green, Right: Red
）
The ways these 3 blocks flash are different for each
pattern.
By pressing the Pattern Test
key, the flashing of
the selected pattern can be verified.
Alarm Pole Flash
Pattern Flash
Pattern 1 (Red, Red, Red) → ( ・・・ ) → (Red, Red, Red) → ( ・・・ ) → (Red, Red, Red)
Pattern 2 (Red, Orange, Red) → ( ・・・ ) → (Red, Orange, Red) → ( ・・・ ) → (Red, Orange, Red)
Pattern 3 (Red, Green, Red) → ( ・・・ ) → (Red, Green, Red) → ( ・・・ ) → (Red, Green, Red)
Pattern 4 ( ・ Red ・ ) → ( ・・・ ) → ( ・ Red ・ ) → ( ・・・ ) → ( ・ Red ・ )
Pattern 5 ( ・ Orange ・ ) → ( ・・・ ) → ( ・ Orange ・ ) → ( ・・・ ) → ( ・ Orange ・ )
Pattern 6 ( ・ Green ・ ) → ( ・・・ ) → ( ・ Green ・ ) → ( ・・・ ) → ( ・ Green ・ )
Pattern 7 (Red, Red ・ ) → ( ・・・ ) → ( ・ Red, Red ）→ ( ・・・ ) → (Red, Red ・ )
Pattern 8 (Red, Orange ・ ) → ( ・・・ ) → ( ・ Orange, Red) → ( ・・・ ) → (Red, Orange ・ )
Pattern 9 (Red, Green ・ ) → ( ・・・ ) → ( ・ Green, Red) → ( ・・・ ) → (Red, Green ・ )
Pattern 10 (Red ・・ ) → ( ・・・ ) → ( ・ Red ・ ) → ( ・・・ ) → ( ・・ Red)
Next, press the alarm level key to assign the selected
flash pattern,