User Manual

4
−
8
●
HR, BP, VPC/ST, BP1, BP2,
NIBP, SpO
2
, TEMP, RR, CO
2
Numeric Display
HR / PR Parameter
Displays the parameter measuring the HR/ PR.
By switching the HR synchronization source, selection from heart rate (HR), SpO
2
pulse rate
(PR_SpO
2
), BP pulse rate (PR_BP) can be made.
HR / PR Synchronization Mark
Displays the synchronization mark corresponding to the HR / PR parameter.
NIBP Measurement Interval
Displays the periodic measurement interval of NIBP. If the periodic measurement is set to OFF,
this area will be left blank.
Alarm OFF Symbol
This symbol will be displayed when the alarm is set OFF.
HR / PR Value
Displays the HR / PR measurement value corresponded to the HR synchronization source
selection.
When the measurable range is exceeded, “
× × ×
” will be displayed.
BP1, BP2
Displays the BP measurement value (SYS / DIA / Mean).
The mean BP display can be set to ON or OFF on the BP configuration menu. When the
measurable range is exceeded, “
× × ×
” will be displayed. When the transducer is disconnected
or when BP zero balance is not performed, “
ｰ ｰ ｰ
” will be displayed.
Time of NIBP Measurement
Displays the starting time of NIBP measurement.
NIBP Cuff Pressure
Displays the cuff pressure during NIBP measurement.
NIBP Value
Displays the NIBP measurement value (SYS / DIA / Mean).
The mean NIBP display can be set to ON or OFF on the NIBP configuration menu. The value will
be displayed as “
ｰ ｰ ｰ
” when the preprogrammed NIBP erase time has elapsed.
SpO
2
Value
Displays the arterial oxygen saturation measurement value.
HR/PR Value
BP 1 Value (SYS / DIA (Mean)
）
Time of NIBP Measurement
NIBP Cuff Pressure
NIBP (SYS / DIA)
SpO
2
Value
Temperature
RR Value
EtCO
2
Value
InspCO
2
Value
HR / PR Parameter
HR / PR Sync. Mark
BP 2 Value (SYS/ DIA (Mean)
）
NIBP Meas. Interval
Alarm OFF Symbol
RR Parameter
RR Synchronization Mark