User's Manual

5
3. Preparation
1) Installing the Battery
The LX-7120(G) functions with one (1) "AA" size (“LR06” size) alkaline battery.
With new battery, the LX-7120(G) is capable of approximately 3 days
continuous operation.
WARNING
 Unplug the ECG lead cable when the battery compartment lid is
opened. Otherwise, patient leakage current beyond the allowable value
may occur.
 Use new "AA" size (“LR06” size) alkaline battery.
 Do not short out the (+) and (-) terminals. It may result in exothermic
heat and fire, the leakage from the battery may damage the equipment,
or an explosion from the battery may occur.
 Install the battery with the correct polarity.
 Do not use a disassembled or a damaged battery due to drop or shock.
The leakage from the battery may damage the equipment, or an
explosion from the battery may occur.
 Remove the exhausted battery immediately. The leakage from the
battery may damage the equipment, or an explosion from the battery
may occur.
 If the transmitter is not in use for a long period of time, remove the
battery and store the equipment in an appropriate place. If the battery is
left in the transmitter for a long period of time, the leakage from the
battery may damage the equipment or an explosion from the battery
may occur.
CAUTION
 Use only alkaline battery. Other battery will shorten the continuous
operating time.
 Once the power switch is on the OFF position, then open the battery
compartment lid.
 Do not replace the battery with wet hands.
 In case of storing the used or unused battery, make sure that the
terminals are not touching other battery or metal parts.