User's Manual

14. Specification
50
Time Constant: 0.4 sec ±25%
Switchin
g
and available to set 0.1 sec ±25%
Pacemaker Pulse
Detection/ Re
j
ection:
Comply with ANSI/AAMI EC13 Pacemaker pulse
re
j
ection capabilit
y
Protection to
Defibrillation:
Meet the requirement of IEC60601-2-27
Respiration (Impedance Method)
A
ccuracy of Sensitivity: 10mm/1Ω ±2mm
(When standard Impedance is 480Ω.)
Resp. Displa
y
Ran
g
e: 0, 9 to 150Bpm
Displa
y
Error of Respiration Rate: ±3Bpm
Measured Current of Respiration: Below 100μA (at 42kHz)
Transmission Method
Modulation Mode: Di
g
ital, Frequenc
y
shift ke
y
in
g
Frequency: 1395 to 1400MHz, 1427 to 1432MHz
Oscillation Method: PLL S
y
nthesizer method b
y
cr
y
stal control
Channel Spacing: 25.0 kHz
Occupied Frequency
Bandwidth:
16 kHz
RF output power: 5mW ±2dB
Transmitting Antenna:
Dielectric Antenna
Safety
General Standard: IEC 60601-1:1988 +A1: 1991 +A2: 1995
(Medical electrical equipment – Part 1: General
requirements for safety)
EMC Standard: IEC 60601-1-2: 2007
(Medical electrical equipment – Part 1: General
requirements for safety – 2. Collateral standard:
Electroma
g
netic compatibilit
y
–
Requirements and tests
)
The class of
protection
against electric
shock:
Internally Powered Equipment
The type of
protection
against electric
shock:
Type CF Applied part