User's Manual

7. Measurement
53
●SpO
2
Display Screen
SpO
2
display screen depends on the transmitter LX-7230N or LX-7230KM.
For the LX-7230N
Pulse wave, pulse rate, SpO
2
measurement value, remaining battery level, and
probe condition are displayed.
The LCD display will automatically turn itself OFF after 60 seconds if no
operation is done. To restart the LCD display, refer to page 62.
When the LCD display is active, press the ▽ button to move onto the next
waveform display screen.
【Descripti
ons of the Screen】
The descriptions of contents displayed on the LCD are as follows.
Indicates the SpO
2
display screen.
Displays the pulse wave.
The waveform size displayed on the
LCD is adjusted automatically.
Displays the SpO
2
measurement value.
Displays the pulse rate.
Displays the level meter of the pulse
wave.
Indicates the amplitude level of the
pulse wave in 8 steps.