Users Manual

3. Preparation
8
Starting Screen
When the power is turned ON, the channel number configured on the
LX-8300M is displayed at the top of the display.
Make sure that the channel number on the
display matches the channel number indicated
on the label of the LX-8300M and the channel
number configured on the receiving monitor.
Channel Display Screen
This display is automatically displayed after the
starting screen and moves on to the waveform
display screen.
Battery Level
After the power is turned ON, make sure to check the remaining battery level
on the display screen.
Refer to the following symbol to check the remaining battery level.
Battery
Symbol
Remaining Battery Level
Full
Getting low but still available
Nearly empty
Replace the batteries.
A message that prompts the
battery check appears on the
screen of the receiving monitor.
NOTE
 When ON/OFF status of SpO
2
measurement is changed, the displayed
battery level may change.
 When the SpO
2
measurement is turned OFF, the remaining operation
time from the point the lowest battery symbol is displayed will be longer
than when the SpO
2
measurement is turned ON.
Battery Symbol