Users Manual

7. Measurement
33
●All Data Display
ECG1 waveform and all other measured data (heart rate, respiration rate,
pulse rate, SpO
2
value) pacemaker marker, remaining battery level, electrode
check message, and SpO
2
OFF status are displayed.
The displayed contents are as follows.
1. Indicates that ECG1 waveform is displayed.
2. Indicates the vertical scale of the displayed ECG.
One scale corresponds to 1 mV. For the above display example, the
display range is ±1mV.
3. Displays the speaker mark when the synchronized tone is active.
For details, refer to “8. Operation”.
4. Displays the heart rate.
5. Displays the respiration rate.
6. Indicates the horizontal scale of the displayed ECG.
One scale corresponds to 1 second.
7. Displays the measured waveform.
8. Displays the SpO
2
value, pulse rate.
“SpO
2
OFF” is displayed when the SpO
2
measurement is set to OFF.
9. Indicates the remaining battery level.
For details, refer to “7. Measurement/Battery Level”.
For details of the displayed messages and icons, refer to “11. Troubleshooting”.
1
3
2
4
5
9
7
6
8