Users Manual

7. Measurement

●ECG Display

ECG1/ECG2 waveform, heart rate, pacemaker mark, remaining battery level,

and electrode check message are displayed.

NOTE

If 3-electrode lead cable is used, ECG2 display will not appear.

The descriptions of the displayed contents are as follows.

1. Indicates ECG1 or ECG2.

2. Indicates the vertical scale of the displayed ECG waveform.

One scale corresponds to 1 mV.

3. Indicates the measuring lead.

4. Indicates the ECG waveform size displayed on the display.

5. Indicates the horizontal scale of the displayed ECG waveform.

One scale corresponds to one second.

6. Displays the ECG waveform.

7. Displays the detection marker when a pacemaker pulse is detected.

8. Displays the speaker mark when synchronized tone is active.

For details, refer to “8. Operation”.

9. Displays the heart rate.

♥ is displayed in synchronization with the heart rate.

10. Indicates the remaining battery level.

For details of the battery level, refer to “3. Preparation”.

For details of the displayed messages and icons, refer to “11. Troubleshooting”.