User Instructions

ManualsBrandsFULAIM ManualsAudio EquipmentLavalier Microphone

Additional Instructions

Transmitter (TX)

1.Use external microphone:

Insert the 3.5mm TRS microphone input cable into the transmitter's 3.5mm TRS external

microphone port and tighten it, then clip the transmitter to the belt through the belt clip and

clip the lavalier microphone to your collar.

Receiver (RX)

1.Work with Camera:

Fix the receiver through the belt clip to the camera's hot shoe mount, then connect the

receiver with camera through the 3.5mm TRS-TRS audio cable; Insert the headphone into

the monitoring port for monitoring.

Tips: Default paired at factory and ready for use when powered on

Summary of content (8 pages)

PAGE 1
Additional Instructions Transmitter (TX) 1.Use external microphone: Insert the 3.5mm TRS microphone input cable into the transmitter's 3.5mm TRS external microphone port and tighten it, then clip the transmitter to the belt through the belt clip and clip the lavalier microphone to your collar. Receiver (RX) 1.Work with Camera: Fix the receiver through the belt clip to the camera's hot shoe mount, then connect the receiver with camera through the 3.
PAGE 2
1）After turning on the transmitter 2）press the power button and the volume “-” button simultaneously until the display screen flickers; 3）turn on the receiver, the receiver indicator flickers three times, meaning that the pairing is successful. 4）Shortly press the power button of the transmitter to exit the pairing mode for operation. Connecting Requirement 1.
PAGE 3
Tips: For Android phones Android phones can use this microphone to record video but some Android native systems do not support external microphones. We recommend to use third-party app video recording software(like "DU Recorder" "Mobizen Screen Recorder" "ilos Screen Recorder" and other video apps) to solve this problem. Android phone with a 3.5mm port can be directly connected to the receiver. If your Android phone doesn't have 3.5mm port, you need to connect your phone to ""3.
PAGE 4
3.
PAGE 5
PAGE 6
PAGE 7
Note： 1. The distance between transmitter and receiver should be more than 20cm. If it less than 20cm, the receiver may shut down the reception of wireless signal. So it's normal that the audio is intermittent. 2. Please stay within 1 meter when using auto IR sync, otherwise the signal may be weak and the sync will not be successful. 3. The working distance will be affected by the microphone antenna. Please protect the antenna to avoid any man-made damage. 4.
PAGE 8
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.