Specification Sheet

Weight & Dimensions
30”-36” Full Gas Ranges 600 SERIES
PACKAGING 30”
lb /
inch
Kg /
mm
GROSS WEIGHT
322 lb 146 Kg
DIMENSION
W
D
H
33"
45"3/4
32"1/4
840
1162
820
PACKAGING 36”
lb /
inch
Kg /
mm
GROSS WEIGHT
377 lb 171 Kg
DIMENSION
W
D
H
39"
45"3/4
32"1/4
990
1162
820
A
Back
min 2-½” (63)
min 18”
(457)
max
13”
(330)
SHADED AREA:
The surface of the entire back wall above the range and below the hood
must be covered with a noncombustible material.
min
30”
(762)
min
48”
(1220)
min
6”
(152)
min
3”
(76)
min
3”
(76)
3”
( 90 )
GAS ELECTRIC
min
4 3/4”
(123)
B
B
min
6”
(152)
*Suggested
location of
utilities
*Consult local code for exact location requirements.
min 18”
(457)
To botton of
ventilation hood
Minimum
to Combustibles
ADDITIONAL CLEARANCES:
For island installation, maintain 2-½ in. minimum from
cutout to back edge of countertop and 3 in. minimum
from cutout to side edges of countertop (see top view).
For island installation, 12" (305) minimum clearance
back of range to combustible rear wall above countertop.
The island installation is not part of the ANSI Z21.1
scope and not certied.
OPENING WIDTH
A & C B
Range 30" 30" (762) 6" (152)
Range 36" 36" (914) 7" (178)
Note: Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and not certied.
Clearances to non-combustible materials must conform with local codes or, in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1/NFPA 54.
Minimum clearances:
Above cooking surface (above 36” [91.4 cm])
• Sides - 6” (15.2 cm)
• Within 6” (15.2 cm) side clearance, wall cabinets no deeper than 13” (33.0 cm) must be minimum
18” (45.7 cm) above cooking surface
• Wall cabinets directly above product must be a minimum of 48” (122 cm) above cooking surface.
• Rear - 0” with 9 ” backguard; 0” with non-combustible rear wall.
Below cooking surface (36” [91.4 cm] and below)
• Install with zero clearance between adjacent combustible construction below the cooking surface and the back and sides of
the appliance
2” (51) max.
protusion from wall
for gas or electrical supply
C
27-1/4"
( 691 )
MAX
37-1/4"
( 947 )
MIN
35-3/8"
( 898 )
29-3/4"
( 756 )
1"
( 25 )
7-3/8"
( 187 )
35-3/4"
( 910 )
1"
( 25 )
7-3/8"
( 187 )
27-1/4"
( 691 )
MAX
37-1/4"
( 947 )
MIN
35-3/8"
( 898 )
3"
( 76 )
1"
( 26 )
9-1/4"
( 236 )
29-3/4"
( 754 )
27-1/4"
( 689 )
20-1/2"
( 524 )
47-3/4"
( 1213 )
1-3/8"
( 35 )
3-3/8"
( 85 )
to
25-3/8"
( 645)
3/8"
(9)