Installation Instructions

ENGLISH

Installation Manual

Step 3

Move the range indoors before installing the legs,



legs are not suitable for moving the appliance over

long distances.

Legs are packed in the cardboard top pack.

CAUTION

Doors and passageways leading to the installation

location require at least 31” opening. If the

opening is less than 31”, the oven door(s) and

control knobs must be removed.

(see Use & Care manual for oven door removal

instructions).

Note: the legs with collar must be mounted on

the back of range to engage the anti tip device.

Step 4

With the foam base still in place, tilt the range laterally



Step 5

Pull out the hand-truck, tilt the range laterally and

insert the second pair of legs. Remove the base

Step 6

Install the backsplash (if provided) by the three

screws on the back and the toe kick

9”

3”

Step 7

After the electrical and gas connections (see both

paragraphs for instructions) measure the four corners



leveling legs to the desired height and ensure range

is level. Turn the bottom section of each leg counter-

clockwise to raise the leg and clock wise to lower

      

making sure to engage the anti-tip bracket.

Step 8

Push toekick against the range until clip snaps to

NOTE: Be sure the toekick snaps securely.