Installation Instructions

• Finish off by mounting the central proﬁle cover onto the

central proﬁles, by pushing it until a click is heard [ 5 ].

• Once completed, push the units into their ﬁnal position

[ 6 ].

• If the units are to be installed inside a niche or within an

enclosed structure, it is necessary to accommodate air

ﬂow at the back of the niche to assure proper ventilation

at the back of the unit of about 20mm. Always mount

front panels on door and drawer before pushing the unit

into its ﬁnal position inside the niche or structure.

• Check the levelling of the appliance, adjusting its feet

and wheels to correct it.

• Secure the appliance to the adjacent cabinets by ﬁxing

to these the side proﬁles trims factory-installed on the

appliance [ 7 ]. To make this operation easier keep the

door and the drawer open.

• Mount the covering frames onto the proﬁles, ﬁrst insert

them laterally and then push ﬁrmly until a “click” is heard

[ 8 ].

WARNING

Take care as appliances will be front-heavy and may tip

before they are secured to the adjacent furniture.