OVENS SERIES 700 INSTALLATION INSTRUCTIONS INSTRUCTIONS D’INSTALLATION INSTRUCCIONES PARA LA INSTALACIÓN
Dear Customer, Thank you for purchasing a Fulgor Milano product. Fulgor Milano is committed to excellence and our signature technologies provide you with professional tools for your kitchen. One of our central philosophies is continuous investment in research that is rooted in developing life enhancing technology. Our goal is to deliver products that are worthy of your family recipes and that will breathe life into your kitchen, the heart of your home.
EN TABLE OF CONTENTS PAGE Introduction 2 Tools you will need 2 Power requirements 2 Choosing oven location 2 Steps for installation 2 Installation notes 3 Electrical supply 7 Wiring requirements 7 Connecting to 208 volt circuit 8 Electrical connections 9 3-Wire branch circuit (for US only) 9 4-Wire branch circuit (for US and Canada) 9 Final checklist WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal
EN Installation Instructions Introduction Power requirements Please read these instructions COMPLETELY AND CAREFULLY. They will save you time and effort and help to ensure optimum oven performance. Be sure to observe all WARNINGS. These installation instructions are intended for use by a qualified installer. In addition to these instructions, the oven shall be installed: The oven must be supplied with the proper voltage and frequency.
Installation Instructions TECHNICAL DATA For cutout dimensions see following section titled: Preparing location SINGLE OVEN F7SP30*1 DOUBLE OVEN UPPER CAVITY LOWER CAVITY F7DP30*1 EN Electrical Ratings and Maximum Connected Load @ 120/240 Volts 60 Hz Amperes kW @ 120/208 Volts 60 Hz Amperes kW 15.4 3.70 16.8 3.50 Amperes kW Amperes kW 31.2 7.50 30.3 6.30 Installation notes 1. Do not slide oven across floor. Damage to floor covering or floor could result. 2.
EN Installation Instructions WALL OR UNDER COUNTER INSTALLATION, SINGLE OVEN Secure oven to cabinet using the screws provided. Screws should be inserted through the mounting holes in the positions indicated in the frame (open door to see frame and mounting holes). Do not over tighten screws. F B Electrical supply junction box A C B C E D E A Electrical supply junction box WALL INSTALLATION, DOUBLE OVEN Secure oven to cabinet using the screws provided.
Installation Instructions EN FLUSH INSTALLATION Mounting strip H Mounting strip F G F G Finished sides (same finish like the cabinet) Finished sides (same finish like the cabinet) Ltr. DIMENSION SINGLE 30” F G H Cutout Width Cutout Height Visible part of the mounting strips 30 1/16” 28 1/32” 3/4” DOUBLE 30” (76.4 cm) 30 1/16” (71.2 cm) 51” ( 1.9 cm) 3/4” ( 76.4 cm) (129.5 cm) ( 1.
EN Installation Instructions PRODUCT-DIMENSIONS 26 3/4” (68 cm) 26 3/4” (68 cm) 50 3/4” (129 cm) 27 7/8” (70.7 cm) 29 3/4” (75.4 cm) 29 3/4” (75.4cm) 7/8” (2.2 cm) 1” (2.5 cm) 3/4” (2 cm) 7 7/8” (20 cm) 7/8” (2.2 cm) 1” (2.5 cm) 17” (43 cm) 3/4” (2 cm) 7 7/8” (20 cm) 49 3/4” (126.2 cm) 23 1/8” (58.7 cm) 17” (43 cm) 27 1/8” (69 cm) 23 1/8” (58.7 cm) 3/4” (1.9 cm) 6 3/4” (1.
Installation Instructions Electrical supply Wiring requirements Before installing the oven have a qualified electrician verify that your home is provided with adequate electrical service and that the addition of the oven will not overload the branch circuit on which it is to be installed. A separate three-wire or four-wire single phase, 240 Volt, 60 Hz, or a 208 Volt, 60Hz branch circuit is required. When making the wire connections, use the entire length of the conduit provided (3 feet).
EN Installation Instructions Connecting to 208 volt circuit This option is provided for areas where standard 240 Volt service is not available. This option must be accessed with the oven connected to power source, and using the following sequence: ELECTRICAL SHOCK HAZARD a) Press the SET key and select the option by means of the arrow and confirm with the START key. • The electrical power to the oven branch circuit must be shut off while line connections are being made.
Installation Instructions EN Electrical connections Be sure your appliance is properly installed and grounded by a qualified technician. Ask your dealer to recommend a qualified technician or an authorized repair service. This appliance is manufactured with a green GROUND wire connected to the oven chassis. After making sure that the power has been turned off, connect the flexible conduit from the oven to the junction box using a U.L. listed conduit connector.
EN Installation Instructions Final checklist To prevent improper connections leading to damage of electrical components and so voiding the warranty, the following steps must be performed: 1. Check the electrical requirements and make sure you have the correct electrical supply and that the oven is properly grounded. 2. Turn on the power supply to the oven. 3. Check power at the junction box wires using a voltmeter having a range of 0-250 VAC.
FR TABLE DES MATIERES PAGE Introduction 2 Outils necessaires 2 Alimentation necessaire 2 Choix de l’emplacement du four 2 Etapes de l’installation 2 Remarques d’installation 3 Alimentation electrique 7 Cablage necessaire 7 Connexion a un circuit de 208 volt 8 Connexions electriques 9 Connexion à 3 fils (Pour US seulement) 9 Connexion à 4 fils (Pour des US ou Canada) 9 Liste de verification finale IMPORTANT: AVERTISSEMENT Si l’information de ce manuel n’est pas suivie exactement, cel
FR Instructions d’Installation Introduction Alimentation necessaire Veuillez lire ces instructions COMPLETEMENT ET SOIGNEUSEMENT. Cela vous fera gagner du temps et épargner des efforts et vous aidera à assurer les meilleures performances du four. Assurez-vous de bien observer tous les AVERTISSEMENTS. Ces instructions d’installation sont conçues pour l’utilisation d’un installateur qualifié.
Instructions d’Installation DONNES TECHNIQUES Pour les dimensions de découpe voir la section suivante intiulée: Préparation de l’emplacement FOUR SIMPLE F7SP30*1 FOUR DOUBLE CAVITÉ SUPERIEURE CAVITÉ INFERIEURE F7DP30*1 Caractéristique èlectriques et puissance raccordéem maximum @ 120/240 Volts 60 Hz Ampères kW @ 120/208 Volts 60 Hz Ampères kW 15.4 3.70 16.8 3.50 Ampères kW Ampères kW 31.2 7.50 30.3 6.30 Remarques d’installation 1. Ne faites pas glisser le four par terre.
FR Instructions d’Installation INSTALLATION DES PAROIS, FOUR SIMPLE Attechez le four au meuble en utilisant les vis fournis. Les vi doivent être in sérées dans les trous de montage dans les positions indiqué es das le montantes (ouverez la porte pour voir le montant et les trours de montage). Ne serrez pas trop les vis.
Instructions d’Installation FR MONTAGE ENCASTRÉ Baguettes de montage H Baguettes de montage F G F G Côtés finis (même finitionque l’arriere) Côtés finis (même finitionque l’arriere) Ltr.
FR Instructions d’Installation DIMENSIONS DU PRODUIT 26 3/4” (68 cm) 26 3/4” (68 cm) 50 3/4” (129 cm) 27 7/8” (70,7 cm) 29 3/4” (75,4 cm) 29 3/4” (75,4cm) 7/8” (2,2 cm) 1” (2,5 cm) 3/4” (2 cm) 7 7/8” (20 cm) 7/8” (2,2 cm) 1” (2,5 cm) 17” (43 cm) 3/4” (2 cm) 7 7/8” (20 cm) 49 3/4” (126,2 cm) 23 1/8” (58,7 cm) 17” (43 cm) 27 1/8” (69 cm) 23 1/8” (58,7 cm) 3/4” (1,9 cm) 6 3/4” (1,9 cm)
Instructions d’Installation Alimentation electrique Cablage necessaire Avant d’installer le four avec un électricien qualifié, vérifiez que votre maison est pourvue du système électrique approprié et qu’en plus le four ne surchargera pas le circuit de branchement sur lequel il doit être installé. Sont nécessaires un triphasé séparé, ou un four à simple phase à 4 fils, 240 Volt, 60 Hz, ou un 208 Volt, 60Hz. Lorsque vous raccordez les fils, utilisez toute la longueur de conduit fourni (90 cm).
FR Instructions d’Installation Connexion a un circuit de 208 volt Cette option existe pour les régions où le standard de 240 Volt n’est pas disponible. Il faut accéder à cette option quand le four est branché à une source d’alimentation, et en utilisant les séquences suivantes : AVERTISSEMENT DANGER D’ELECTROCUTION a) Presser la touche SET et sélectionner l’option avec la flèche, puis valider avec la touche START .
Instructions d’Installation FR Connexions electriques Assurez-vous que votre installation est correctement installée et branchée par un technicien qualifié. Demandez à votre revendeur un technicien qualifié ou un service de réparation agréé. Cet appareil est fabriqué avec un conducteur de terre vert connecté au châssis du four. Après vous être assurer qu’il n’y a plus de courant, branchez le conduit flexible depuis le four jusqu’au boîtier de raccordement en utilisant un connecteur de conduit U.L. listed.
FR Instructions d’Installation Liste de verification finale Pour éviter que des connexions de raccordement n’endommagentles composants électriques et d’annuler la garantie, les étapes suivantes doivent être exécutées: 1. Vérifiez les conditions électriques et vérifiez que votre alimentation électrique est correcte et que le four est correctement mis à la masse. 2. Remettez l’alimentation électrique au four 3.
ES TABELA DE CONTENIDO PÁGINA Introducción 2 Herramientas necesarias 2 Requisitos de corriente 2 Elegir la colocación del horno 2 Pasos para la instalación 2 Notas para la instalación 3 Alimentación eléctrica 7 Requisitos de cableado 7 Conexión a un circuito de 208 voltios 8 Conexiones eléctricas 9 Circuito de conexión de 3 hilos (sólo para US) 9 Circuito de conexión de 4-hilos (para us o canada) 9 Lista de comprobaciones final ATENCIÓN Si no se siguen exactamente las siguientes i
ES Instrucciones de Installación Introducción Requisitos de corriente Por favor, lea ATENTA Y COMPLETAMENTE estas Instrucciones. Puede hacerle ahorrar tiempo y esfuerzo y ayudarle a garantizar un rendimiento óptimo del horno. Asegúrese de que respeta todas las ADVERTENCIAS. Estas instrucciones de instalación están concebidas par el uso de un instalador cualificado.Además de estas instrucciones, el horno tendrá que instalarse: El horno ha de estar abastecido con el voltaje y la frecuencia apropiados.
Instrucciones de Installación DATOS TÉCNICOS Para dimensiones de hueco vea la siguiente sección titulada: Preparación del lugar HORNO INDIVIDUAL F7SP30*1 HORNO DOBLE HORNO SUPERIOR HORNO INFERIOR F7DP30*1 ES Intensidad de la Corriente Elèctrica y Màxima Potencia Admisible @ 120/240 Volts 60 Hz Amperios Vatios @ 120/208 Volts 60 Hz Amperios Vatios 15.4 3.70 16.8 3.50 Amperios Vatios Amperios Vatios 31.2 7.50 30.3 6.30 Notas para la instalación 1. No arrastre el horno por el suelo.
ES Instrucciones de Installación INSTALACIÓN EMPOTRADA, HORNO INDIVIDUAL Sujete el horno al mueble utilizando los tornillos en dotación. Los tornillos tienen que introducirse a lo largo de los orificios de montaje en las posiciones que se indican en el marco (abra la puerta para ver el marco y les orificios de montaje).
Instrucciones de Installación ES INSTALACIÓN EMPOTRADA Tiras de montaje H Tiras de montaje F G F G Lados acabados (el mismo acabado del armadio) Letra.
ES Instrucciones de Installación DIMENSIONES DEL PRODUCTO 26 3/4” (68 cm) 26 3/4” (68 cm) 50 3/4” (129 cm) 27 7/8” (70,7 cm) 29 3/4” (75,4 cm) 29 3/4” (75,4cm) 7/8” (2,2 cm) 1” (2,5 cm) 3/4” (2 cm) 7 7/8” (20 cm) 7/8” (2,2 cm) 1” (2,5 cm) 17” (43 cm) 3/4” (2 cm) 7 7/8” (20 cm) 49 3/4” (126,2 cm) 23 1/8” (58,7 cm) 17” (43 cm) 27 1/8” (69 cm) 23 1/8” (58,7 cm) 3/4” (1,9 cm) 6 3/4” (1,9 cm)
Instrucciones de Installación Alimentación eléctrica Requisitos de cableado Antes de instalar el horno haga que un electricista cualificado controle que su casa recibe un servicio eléctrico apropiado y que el añadido del horno no sobrecarga el circuito derivado en el que se instalará. Se precisa un circuito derivado de una sola fase separada de tres o cuatro cables, 240 Voltios, 60 Hz, o un circuito derivado de 208 Voltios, 60Hz.
ES Instrucciones de Installación Conexión a un circuito de 208 voltios Esta opción se suministra para áreas en donde el servicio de 240 voltios estándar no se encuentra a disposición. Se tiene que acceder a esta opción con el horno conectado a la toma de corriente y utilizar la siguiente secuencia: a) Pulsar la tecla SET , seleccionar la opción con la flecha y convalidar con la tecla START .
Instrucciones de Installación ES Conexiones eléctricas Asegúrese de que un técnico cualificado instale y conecte a tierra correctamente su aparato. Consulte con su vendedor para que le recomiende un técnico cualificado o un servicio de mantenimiento autorizado. Este aparato está fabricado con un hilo verde de TIERRA conectado al bastidor del horno.
ES Instrucciones de Installación Lista de comprobaciones final Pour éviter que des connexions de raccordement n’endommagentles composants électriques et d’annuler la garantie, les étapes suivantes doivent être exécutées: 1. Controle los requisitos eléctricos y asegúrese de que tiene la alimentación eléctrica correcta y que el horno está correctamente conectado a tierra. 2. Encienda la corriente del horno. 3.
Note / Note / Nota 11
Note / Note / Nota 12
Note / Note / Nota 13
Note / Note / Nota 14
09FL8351 ed 02/2018