User Guide

ManualsBrandsFULHAM ManualsMotion SensorFULHAM ELMOPLX00SR Integrated Low Voltage Daylight Harvesting Bi-level PIR Motion Sensor

Table Of Contents

Fulham Co. Inc.: 12705 South Van Ness Ave., Hawthorne, CA 90250 Tel.: 1-323-779-2980 Fax.: 1-323-754-9060.

Specifications subject to change without notice.

order@fulham.com

www.fulham.com

Page 1 of 3

2023-926 Rev A

ELMOPLX00SR

The ELMOPLX00SR is a compact size PIR sensor that

combines occupancy sensing with photocell functionality.

When used with 0-10V dim-to-oﬀ LED drivers, it enables any

lighting manufacturer to deliver sensor-equipped ﬁxtures with

minimal engineering eﬀort.

It operates on 12V DC which can be supplied by a LED

driver, which will save OEM cost on the manufacturer side.

Diﬀerent modes can be selected according to the diﬀerent

applications through the ELMOPLX00SR-RM IR remote

controller.

The integrated photocell can switch the lights on and oﬀ for

dusk to dawn control, so that lights remains on overnight even

without motion detection.

Under daylight harvesting mode, the auto-calibration function

can control the amount of electric light by measuring the

overall combined natural and electric light to achieve the

desired light level.

Model Number

Model

ELMOPLX00SR

ELMOPLX00SR-RM

Description

Integrated low voltage Daylight Harvesting / Bi-level PIR motion sensor

Remote Controller

Speciﬁcations

Input

Output

Dimming

DC12V, 8mA

0-10V, 10mA

0-10V, Compatible with Dim-to-oﬀ LED drivers, 0-10V dimming voltage of dim to oﬀ is 0V.

Detection Range 48ft

Mounting Height

IP Rating

15ft

Operating Temperature -30°F~131°F (-30°C~55°C)

Certiﬁcation UL

Warranty 5 Years

Mechanical Drawing

Unit: mm/inch

Integrated Low Voltage Daylight Harvesting / Bi-level PIR Motion Sensor

Summary of content (3 pages)

PAGE 1
ELMOPLX00SR Integrated Low Voltage Daylight Harvesting / Bi-level PIR Motion Sensor The ELMOPLX00SR is a compact size PIR sensor that combines occupancy sensing with photocell functionality. When used with 0-10V dim-to-oﬀ LED drivers, it enables any lighting manufacturer to deliver sensor-equipped ﬁxtures with minimal engineering eﬀort. It operates on 12V DC which can be supplied by a LED driver, which will save OEM cost on the manufacturer side.
PAGE 2
ELMOPLX00SR Wiring Diagram (LED+) (LED -) Black (Line) 120-277V LED DRIVER White (Neutral) To LED Load Yellow (AUX 12V+) Pink (AUX & 0-10V Dim-) Purple (0-10V Dim+) Sensor Detection Graphs Detection Coverage (Side View) Detection Coverage (Top View) 0-10V DIMMING CURVE 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 0.002V 1.26V 1.566V2.048V 2.542V 3.026V 3.518V Dim to oﬀ 4V 4.49V 4.98V 5.47V 5.96V 6.45V 6.93V 7.43V 7.92V 8.41V 8.89V 9.38V 9.87V Fulham Co. Inc.: 12705 South Van Ness Ave.
PAGE 3
ELMOPLX00SR Remote Control Instructions Memory Mode (Commissioning) To begin commissioning follow the steps bellow: 1. Select either A, B, C, D. 2. Indicator lights on the remote will ﬂash to indicate the current saved settings. 3. Settings can be conﬁgured by pressing the appropriate buttons in the high lighted gray area of the remote control. (TRIM-LEVEL, SENSITIVITY, HOLD TIME, DIM, STANDBY TIME and PHOTOCELL). Review selections and make changes as necessary. 4.