Safety Manual

Full Swing Launch Monitor Safety Manual
Instructions for Charging
1. Locate the USB port on the side of the KIT.
2. Gently lift the USB port cover (do not pull) from the bottom of the USB port. Insert the charging
cable into the USB port and into the charger
3. Plug the charger into the wall. Charging begins automatically. While charging, the Light Bar indicates
the power level of the battery.
Instructions for Safe Installation and Interconnection of the Equipment
1. Insert the charger cable into the charger.
2. Attach the charger cable to the USB port on the side of the KIT.
3. Plug the AC charger into the wall.
Instructions to Locate Regulatory Information on the KIT
1. Start the KIT. Wait until it fully loads (boots).
2. Select Menu > Legal and Regulatory.
3. Select from the following options:
 Regulatory Certifications
 RF Exposure Warning
 Open Source Software Licenses