Owner's manual

© The Fulton Companies 2014
INSTALLATION HPN-IOM-2014-0416 SECTION 2
2-14
! WARNING
All information in this manual is for
reference and guidance purposes,
and does not substitute for required
professional training, conduct,
and strict adherence to applicable
jurisdictional/professional codes and
regulations.
Non-Fulton product information is for
reference purposes only. No Fulton
document may substitute for full
review of documentation available
from the component manufacturer.
TABLE 5  RECOMMENDED LOADS FOR FLEXITALLIC SPIRAL WOUND CLASS 300# GASKETS
SAE GRADE 5 BOLTS OR EQUAL
Nominal Flange
Size (in.)
Number of Bolts Diameter of Bolts
(in.)
Preferred Torque
Req. Per Bolt (ft-lb)
1/2 4 1/2 45
3/4 4 5/8 90
1 4 5/8 90
1 1/4 4 5/8 90
1 1/2 4 3/4 150
2 8 5/8 90
2 1/2 8 3/4 150
3 8 3/4 150
3 1/2 8 3/4 150
4 8 3/4 150
5 8 3/4 150
6 12 3/4 150
8 12 7/8 240
10 16 1 368
TABLE 6  RECOMMENDED LOADS FOR JM CLIPPER ELASTOGRAPH 150# GASKETS SAE
GRADE 5 BOLTS OR EQUAL
Nominal Flange
Size (in.)
Number of Bolts Diameter of Bolts
(in.)
Preferred Torque
Req. Per Bolt (ft-lb)
1/2 4 1/2 30
3/4 4 1/2 30
1 4 1/2 30
1 1/4 4 1/2 30
1 1/2 4 1/2 30
2 4 5/8 60
2 1/2 4 5/8 60
3 4 5/8 60
4 8 5/8 60
5 8 3/4 100
6 8 3/4 100
8 8 3/4 100
10 12 7/8 160