User manual

If the indicator is ashing in the DMX mode, no DMX signal is received. Maybe the DMX con‐

troller is not switched on or there is a cabling error. If the indicator lights permanently, the

device receives a valid DMX signal.

When you congure a group of devices in master/slave mode, the rst unit will control the

other units for an automatic, sound-activated, synchronized show. This function is ideal when

you want to start a show immediately. Connect the DMX output of the master device to the

DMX input of the rst slave device. Then connect the DMX output of the rst slave device to

the DMX input of the second slave device and so on.

DMX indicator

Connections in master/slave

mode

Starting up

LED BARbara 16 LED BARbara 24

LED Bar