User manual

7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.2 Main menu
Press [MODE] to activate the main menu and select an operating mode. Use [UP] and [DOWN]
to change the respectively indicated value. When the display shows the desired value press
[MODE].
If you don't press any button for about 30 seconds, the current setting will be automatically
applied and the display turns o. The set values are retained as long as the device is connected
to the mains power supply.
Operating
30
LED BARbara 16 LED BARbara 24
LED Bar