User manual

A built-in automatic show can only be activated when the unit is operating in stand-alone

mode or as master in a master / slave combination. This setting is only relevant if the device is

not controlled via DMX.

Press [MODE] repeatedly until the display shows ‘Prxx’ . Now you can select one of the preprog‐

rammed automatic shows. Use [UP] and [DOWN] to select a value between ‘Pr01’ and ‘Pr21’ .

For programmes Pr20 and Pr21 you can set a static colour across all segments (background

colour) or a colour that lights up segment-wise (hopping colour). Press [SETUP] repeatedly until

the display shows ‘1xxx’ (background colour) or ‘2xxx’ (hopping colour), respectively. With

[UP] and [DOWN] you can choose from the following options:

Display Meaning

‘--r’ Red

‘-rg’ Red and green

‘--g’ Green

‘-gb’ Green and blue

‘--b’ Blue

Operating mode ‘Built-in auto‐

matic show’

Operating

LED BARbara 16 LED BARbara 24

LED Bar