User manual

Automatic operation can only be activated when the unit is operating in stand alone mode or

as master in a master / slave combination. This setting is only relevant if the device is not con‐

trolled via DMX.

Press [MODE] repeatedly until the display shows ‘Auto’ .

To adjust the speed of the automatic mode, press [SETUP] repeatedly until the display shows

‘SPxx’ . With [UP] and [DOWN] you can now select a value between ‘SP01’ (slow) and ‘SP99’

(fast) as well as ‘SPFL’ (ash eect).

To adjust the strobe frequency of the automatic mode, press [SETUP] repeatedly until the dis‐

play shows ‘FSxx’ . With [UP] and [DOWN] you can now select a value between ‘SPFS00’ (slow)

and ‘FS99’ (fast).

To adjust the fade speed of the automatic mode, press [SETUP] repeatedly until the display

shows ‘Fdxx’ . With [UP] and [DOWN] you can now select a value between ‘Fd00’ (slow) and

‘Fd99’ (fast).

Wait about 30 seconds until the display turns dark. Then the settings have been applied. To

return to the parent menu without making changes, press [MODE].

Operating mode ‘Automatic’

Operating

LED BARbara 16 LED BARbara 24

LED Bar