User manual

This setting is only relevant when the device is controlled via DMX.
Press [MODE] repeatedly until the display shows ‘dxxx’ .
Now you can set the number of the rst DMX channel to be used by the device (DMX address).
Use [UP] and [DOWN] to select a value between 1 and 512 (the display shows ‘d001’ … ‘d512’ ).
Make sure that this number matches the conguration of your DMX controller. The following
table shows the highest possible rst DMX address for the various DMX modes.
Mode Highest possible DMX address
2-channel 511
3-channel 510
5-channel 508
24-channel 489
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE].
DMX address
Operating
34
LED BARbara 16 LED BARbara 24
LED Bar