User manual

A sound controlled automatic show can only be activated when the unit is operating in stand

alone mode or as master in a master / slave combination. This setting is only relevant if the

device is not controlled via DMX.

Press [MODE] repeatedly until the display shows ‘SUxx’ . This activates a sound controlled auto‐

matic show.

Now you can adjust the sensitivity of the built-in microphone for sound control. Use [UP] and

[DOWN] to select a value between 0 (low sensitivity) and 31 (high sensitivity), the display

shows ‘SU00’ … ‘SU31’ .

Wait about 30 seconds until the display turns dark. Then the settings have been applied. To

return to the parent menu without making changes, press [MODE].

Sound control and microphone

sensitivity

Operating

LED BARbara 16 LED BARbara 24

LED Bar