User manual

A constant unicoloured pattern can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press [MODE] repeatedly until the display shows ‘Colr’ .
Press [SETUP]. With [UP] and [DOWN] you can choose from the following options:
Display Meaning
‘I--r’ Red
‘2-rg’ Red and green
‘3--g’ Green
‘4-gb’ Green and blue
‘5--b’ Blue
‘6-rb’ Red and blue
‘7rgb’ Red and green and blue
‘ OFF’ LEDs o
Constant unicoloured pattern
Operating
LED BARbara 16 LED BARbara 24
37
LED Bar