User manual

If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item .
Use this function to reset positions and colours to their respective programmed parameters.
If you want to execute this function use [UP] and [DOWN] to select ‘on’ and conrm with
[ENTER]. If you do not want to execute this function select ‘oFF’ and conrm with [ENTER].
If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item
. Use this function to specify whether the device operates as ‘Master’ ( ) and con‐
trols other units, or works in ‘Stand-alone’ mode ( ).
Use [UP] and [DOWN] to select the desired function and conrm with [ENTER].
Press [MODE] repeatedly until the display shows and conrm with [ENTER]. Press [DOWN]
to call up the menu item and conrm with [ENTER]. Press [DOWN] to call up the menu
item and conrm with [ENTER]. This function allows you to specify that the device oper‐
ates as ‘master’.
You can then select one of the automatic programmes or activate the sound mode.
If the slave devices of the signal chain don’t follow the settings of the master device, press
[MODE] and then [UP] or [DOWN] on the slave devices until the display shows [SLAV].
If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item
. Use this function to specify whether the device operates in Auto mode ( ) or
sound-controlled ( ).
Use [UP] and [DOWN] to select the desired function and conrm with [ENTER].
Reset Machine
Master and Stand-alone opera‐
tion
Congure the rst device in the
signal chain as master
Auto and Sound
Operating
PicoSpot 60
33
Moving Head