User manual

If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item
. Press [ENTER] again, the display shows . This function allows you to specify
whether the LED lights up in DMX mode during the movements of the device head or not.
Press [ENTER] to call up the function. Use [UP] and [DOWN] to select ‘on’ and press [ENTER] to
enable this function (LED ‘o’ on DMX-controlled movements). Choose ‘oFF’ and press [ENTER]
to disable this function (LED ‘on’ on DMX-controlled movements).
Press [MODE] repeatedly until the display shows again.
If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item
. Press [ENTER] again, the display shows . Use [UP] and [DOWN] to select and
press [ENTER]. This function allows you to specify whether the Pan/Tilt movements should be
inverted.
Press [ENTER] to call up the function. Use [UP] and [DOWN] to call up ‘PAN’ or ‘TILT’ and press
[ENTER]. Select the menu item ‘rEV’ to set the desired value for the inversion with ‘no’ or ‘yes’ .
Press [MODE] repeatedly until the display shows again.
If necessary, press [DOWN] repeatedly and conrm with [ENTER] to call up the menu item .
Here you can assign the scene currently performed by the device to the memory location for
the scene .
Press [ENTER] twice. The display shows ‘no’ . Press [UP] or [DOWN] and conrm the display ‘Yes’
with [ENTER] to save the scene. This will overwrite the previously saved parameters for this
scene.
Press [MODE] repeatedly until the display shows again.
Motor Set
Inverting Pan / Tilt
Recording scenes
Operating
36
PicoSpot 60
Moving Head