User manual

8 Remote control
To use the remote control, point its infrared diode at the infrared sensor on the unit and press
the desired buttons. The maximum operating distance is about 9 m. The device will only
respond to the remote control signals if it is not controlled via DMX.
To activate remote control operation, press [STAND BY] on the remote control and then
[FULL ON].
1 Infrared diode | sends the infrared signals to the device.
2 [STAND BY] | stops the automatic mode and blackouts the unit. The display shows ‘StoP’ .
In this mode, the device responds to the remote control.
3 [FULL ON] | press this button to call up the programmed light scene.
4 [GOBO] | to call up various Gobos for the current light scene. Then press one of the
number buttons 1 - 8 for the desired Gobo.
5 [Dimmer + / –] | adjusts the light intensity between 0 and 100 %. Press repeatedly
[Dimmer +] or keep the button pressed to increase the light intensity. Press repeatedly
[Dimmer–] or keep the button pressed to decrease the light intensity.
6 [STROBE] | enables the Strobe function for the current light scene. Then press one of the
number buttons 2 - 9 for the desired strobe frequency. Press number button 1 to turn
the strobe function o.
STAND BY
FULL ON GOBO DIMMER
+
STROBE COLOR
DIMMER
–
SOUND ON SHOW SOUND OFF
7 8 9
4 5 7
1 2 3
#
)
,
&$
ö
%
'
(
*
+
Remote control
44
PicoSpot 60
Moving Head