Satmix 2.
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 16.12.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
General information Warning signs Type of danger Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker.
Features 3 Features n Active 2.1 system consisting of an active subwoofer with built-in 4-channel mixer and two satellites n Inputs: XLR / 1/4" combo socket, RCA jack, 3.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Installation Pairing with Bluetooth devices Press [BLUETOOTH PAIR] to pair the device with other Bluetooth devices. It is visible under the name “Satmix 2.1”. After successful pairing the LED lights. 4.1 Tips on handling speakers We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐ ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound will be evenly spread with maximum range throughout the audience area.
Connections and controls 5 Connections and controls Rear panel ( ' & % $ # ö &$)* 2 1 3 2 1 3 543 , + . / 0 1 2 Satmix 2.1 2.1Active Speaker System Power (Peak): 1200W < ; : INPUT: 100V-120V~50/60Hz 220V-240V~50/60Hz 6 7 8 FUSE: 100-120V T10AL250V 220-240V T5AL250V Auto Stand-by POWER STBY OFF ON INPUT VOLTAGE 9 Satmix 2.
Connections and controls 1 [CH 1], [CH 2] Inputs for line or microphone level signals (XLR / 1/4" combo sockets). 2 [LINE/MIC] Switch for the signal level at the input. Switch released: Line level, switch pressed: microphone level.
Connections and controls 10 [BLUETOOTH PAIR] Starts the pairing with a Bluetooth device 11 [SUBVOL] This rotary control can be used to adjust the subwoofer volume. 12 [MASTER] This rotary control can be used to adjust the overall volume (subwoofer and connected external speakers). 13 [POWER] This LED indicates that the device is switched on and operational. 14 [LIMIT] This LED indicates that the input level is too high and thus the input is overloaded.
Connections and controls 16 [DSP PRESET] Toggles the built-in digital signal processor between the different settings to adjust the sound characteristic. The indicator LEDs indicate the selected setting: n n n n [MUSIC] [LIVE] [DJ] [SPEECH] 17 [MIX OUT] At this line level output, the sum signal is present which e.g. can be sent to a separate power amp. 18 [AUX] Input for a line level signal, designed as 3.
Connections and controls 21 [Auto Stand-by] Switch that turns the automatic shutdown function on and off. When pressed, the function is deactivated, when not pressed, it is activated. The device will turn off after approx. 60 minutes without input signal. When the input signal recurs, the device returns automatically. This LED lights when the automatic shutdown function is turned on. 22 [POWER] Main switch.
Technical specifications 6 Technical specifications Subwoofer Speaker 1 × 10" woofer with 2" voice coil Input connections 2 × XLR / ¼" jack combo socket (balanced) 2 × 1/4" jack socket (balanced / unbalanced) 1 × 3.5 mm jack socket 2 × RCA sockets Input impedance Output connections XLR 2.
Technical specifications Frequency range subwoofer 38 Hz…150 Hz Power output to satellites 2 × 150 W (RMS) 2 × 300 W (PEAK) Frequency range satellites 250 Hz…18 kHz Crossover frequency 200 Hz Signal-to-noise ratio 86 dB Max. sound pressure level 124 dB Bluetooth® Frequency range 2.402 GHz … 2.480 GHz Max. transmission power +2 dBm Standard Version 5.0 Name SATMIX 2.1 Operating supply voltage 110/230 V Power consumption 850 W 50/60 Hz Satmix 2.
Technical specifications Fuse 110 V: 5 × 20 mm, 10 A / 250 V, slow-blow 230 V: 5 × 20 mm, 5 A / 250 V, slow-blow Dimensions (W × H × D) 470 mm × 515 mm × 356 mm Weight 16.5 kg Ambient conditions Temperature range 0 °C…40 °C relative humidity 20 %…80 % (non-condensing) Satellites Speaker each 6 × 2 3/4" Neodym Full-Range speaker Inputs Lockable chassis socket (Speaker Twist) Dimensions (W × H × D) 107 mm × 540 mm × 107 mm Weight 1.
Technical specifications Frequency response 110 100 90 80 70 60 50 40 30 20 10 20 Hz 50 100 200 500 1K 2K 5K 10K 20K Satmix 2.
Plug and connection assignment 7 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured.
Plug and connection assignment Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise inter‐ ference. 1/4" TS phone plug (mono, unbalanced) 1 Signal 2 Ground, shielding 1 Signal (in phase, +) 2 Signal (out of phase, –) 3 Ground 1/4" TRS phone plug (mono, bal‐ anced) Satmix 2.
Plug and connection assignment Three-pole 1/8" mini phone jack (stereo, unbalanced) 1 Signal (left) 2 Signal (right) 3 Ground, shielding 1 Ground, shielding 2 Signal (in phase, +) 3 Signal (out of phase, –) 4 Shielding on plug housing (option) XLR plug (balanced) PA system 26
Plug and connection assignment RCA connection Drawing and table indicate the pin assignment of an RCA plug. 1 Signal 2 Ground, shielding Satmix 2.
Protecting the environment 8 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes Satmix 2.
Notes PA system 30
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
