User manual

To reset the device to factory default settings, press [ON/OFF] to blackout the unit and then

simultaneously [9], [8] and [7].

7.3 Operating controls on the device

1. Press [Mode] to activate the main menu.

2. Press again [Mode] to call up further menu items.

3. To activate the respectively shown menu item, press [Setup].

4. Use [Up] and [Down] to change the respectively indicated value. Changed values and

settings will immediately take eect.

5. With [Mode] you return to the previous menu level.

If you do not press any key for about 15 seconds, the display will turn o. The set values are

retained even when the device is disconnected from the mains power supply.

Reset to factory defaults

Operating

LED PAR