User manual

1. Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Pro’ . Press [Setup] to
then select with [Up] | [Down] one of the programmes ‘Pr01’ to ‘Pr.28’ .
2. If you select ‘Pr.01’ press [Setup] and then use [Up] | [Down] to call up 16 programmed
colour patterns that are constantly lighting. Or you select ‘-OFF’ to blackout the unit.
Press [Setup] to then adjust with [Up] | [Down] the strobe frequency between ‘FS.01’
(slow) and ‘FS.99’ (fast). Select ‘FS.00’ for constant light.
3. Programmes ‘Pr.02’ to ‘Pr.16’ oer preprogrammed colour sequences. After selecting
one of these programmes, press [Setup] to then select with [Up] | [Down] the speed of
the colour sequences from ‘SP.01’ (slow) to ‘SP.FL’ (fast). Press [Setup] to then adjust
with [Up] | [Down] the strobe frequency from ‘FS.00’ (slow) and ‘FS.99’ (fast).
Programme mode
Operating
LED PAR
38