User manual

1. Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Set’ and conrm with

[Setup].

2. Use [Up] and [Down] to select the menu item ‘Cur’ and conrm with [Setup].

3. With [Up] and [Down] you can select one of the following dimmer curves. The dimmer

curve determines how the brightness increases or decreases depending on the set DMX

value.

Display Meaning

‘Cu-1’ Linear (proportional) course

‘Cu-2’ Non-linear curve with a distinctive at prole at the

beginning and end

‘Cu-3’ Inverted quadratic curve with a steep prole at the

beginning and at prole at the end

‘Cu-4’ Inverted square curve with a steep prole at the

beginning and at prole at the end

Dimmer curve

Operating

LED PAR