User manual

1. Press [Mode] or [Up] | [Down] repeatedly until the display shows ‘Set’ and conrm with
[Setup].
2. Use [Up] and [Down] to select the menu item ‘rSt’ and conrm with [Setup].
3. With [Up] and [Down] you can choose between ‘Yes’ (perform reset) and ‘No’ (no reset).
Select ‘Yes’ .
Conrm the selection with ‘Setup’ .
ð
The device is reset to the default settings.
1. Press [Mode], use [Up] and [Down] to select the menu item ‘INFO’ and conrm with
[Setup].
2. Use [Up] and [Down] to select the menu item ‘Ver’ and conrm with [Setup].
ð
The display shows the current software version used by the device.
3. Press [Mode].
ð
The menu is closed.
Reset
Software version
Operating
LED PAR
44