User manual

Symptom Remedy

The unit does not work, no light,

the display is dark

Check the mains connection and the main fuse.

Apparently no function despite

proper power supply

Check if the unit is in DMX mode or in ‘slave’ mode. If so,

check the device into a dierent mode.

No response to the DMX con‐

troller

1. If the unit is in DMX mode and the display ashes, no

DMX signal is received. Check that the DMX controller is

switched on. Check the DMX connectors and cables for

proper connection.

2. If the unit is in DMX mode and a DMX controller is

connected and turned on, a dot on the fourth digit of

the display will ash. If it doesn't, no valid DMX signal is

received. Check that the DMX controller is switched on.

Check the DMX connectors and cables for proper con‐

nection.

3. If the display dot is ashing but there is still no

response, check the address settings and the DMX

polarity.

Troubleshooting

LED PAR