Operation Manual

12
21. USB terminal (p. 14)
22. Coaxial digital audio output jack (p. 10)
23. Composite video input jack (p. 9)
24. Audio (L/R) input jacks (p. 9)
25. Antenna input jack (p. 5)
26. Headphone audio output jack
27. AC power cord
28. YPbPr (Component video) input jacks (p. 9)
29. HDMI input jack (p. 8)
30. VGA AUDIO input jack(p. 8)
31. D-SUB (VGA) input jack (p. 8)
32. Standby / Power indicator
Lights up red when the unit goes into standby
mode.
Light off when power is on.
33. Infrared sensor window
Receives the infrared rays transmitted from the
remote control.
21
22
23
24
25
26
27
31
30
32/33
28
29
HDMI
D-SUB(VGA)
VGA AUDIO
YPbPr
Pr
Pb
Y
USBCOAXIAL OUTR / L - AV IN - VIDEO
ANTENNA IN
PHONES
• Data input from USB flash memory only.
• User should not connect any devices to the USB terminal
such as digital camera, keyboard, mouse, etc. (because
these will not work.)
• The software update is, in most cases, handled by an
authorised service person or in some circumstances the
user may be asked to do the software update themselves.
• The HDMI socket is guaranteed to be used for single source
only. It does not guarantee any adaptor, switches or other
connecting device for the purpose of multiple sources. The
usage of such device even if it is capable is at customer risk.