Operation Manual

13
Watching a TV Programme
To select a channel
Use repeatedly to select your desired
channel, or use the Number buttons to enter a
specific channel number, then press OK for quicker
access.
(e.g.) If you want to select the channel 24 without
pressing OK, press 2 first, then press 4 within 3
seconds.
To adjust the volume
Use to increase / decrease the audio
volume.
Press to turn the sound on / off temporarily.
Favorite
You can easily locate a favorite channel.
1 Press FAV while watching a programme to show
the favorite channel list.
2 Use Ÿ / ź to select the channel you want, then
press OK.
3 Press EXIT to exit.
Sleep Timer
The sleep timer can be set for the unit to go to the
standby mode after an incremental period of time.
1 Press SLEEP repeatedly to change the sleep
time period.
Switching the Input Mode
You can select a desired input mode from available
sources.
1 Press INPUT.
2 Use Ÿ / ź to select the input mode you want,
then press OK.
Picture Format
You can select a desired TV screen size. Press
ASPECT button repeatedly to switch the TV screen
display mode.
Available options are as mentioned below.
OPERATIONS
Read this first
These operations are accessible by remote control.
Some may also be accessible by controls on the main
unit.
• You can recover the original volume by pressing again
or .
• You can set favorite channel at “[Programme Edit]” (p. 18).
• Use FAV to select the favorite channel while
watching a programme.
• Use to move to the previous or next page.
• This unit need few seconds to memorise the favorite
setting.
• If you unplug the AC power cord immediately after the
setting, It will not be registered in the memory.
1 TF1 HD
2 France 2 HD
6 M6HD
Favorite List
ATV
ATV
ATV
OK
• Each time you press SLEEP, the timer increases from
10 minutes up to 240 minutes.
• Press SLEEP repeatedly until [Off] appears to cancel the
sleep timer.
• If the unit goes into standby mode, the sleep timer will be
cancelled.
SD:
[16:9], [4:3], [Zoom1], [Zoom2]
HD:
[16:9], [4:3], [Just Scan]
PC:
[16:9], [4:3]
• You cannot set screen display mode in playback mode.
• You can set another way at “[Aspect Ratio]” (p. 21).
Media
PC
HDMI
ATV
AV
YPbPr
Input Source
OK
Enter