Operation Manual
17
EN
[First Time Installation]
This section will guide you through the unit's initial
setup which includes selecting a language for your on-
screen menu and auto scan, which automatically
scans and memorises viewable channels.
2 Use ▲ / ▼ to select [First Time Installation],
then press OK.
3 Use ◄ / ► to select the location, then press OK.
4
Use
▲ / ▼
to select
[OSD Language]
, the
n select
the language you want, using ◄ / ►.
5 Use ▲ / ▼ to select [Auto Tuning], then press
OK.
6 Use ▲ / ▼ to select [Country], then select the
country you want, using ◄ / ►.
7 Use ▲ / ▼ to select [Tune type], then select
[DTV], [ATV] or both channel, using ◄ / ►.
8 Press OK to start scanning.
[Reset]
You can restore the all settings except channel setting
and parental lock settings.
2 Use ▲ / ▼ to select [Reset], then press OK.
3 Press ◄ to select [Yes] to reset to default
settings.
[CEC]
If you set to [On], HDMI CEC function allows your
device to act in conjunction with this unit.
2 Use ▲ / ▼ to select [CEC], then select [On] or
[Off], using ◄ / ►.
[Software Update(USB)]
It is available to update software using USB.
2 Use ▲ / ▼ to select [Software Update(USB)],
then press OK.
• Select [Home Mode], this unit is set to maximise the energy
efficiency for home setting and it can be adjusted through a
choice of picture and sound quality according to your
preference.
• Select [Retail Mode], this unit will be set up with predefined
setting for retail displays.
• If you select [Retail Mode], the confirm message will
appear.
• Scan confirmation menu will appear.
• If you press MENU during channel scanning, this operation
will be paused, then press MENU again to exit the initial
setup.
OK
First Time Installation
Home Mode
English
OSD Language
Auto Tuning
• After you select [Yes], the unit go into standby and turns on
automatically.
• Your device must be compatible with HDMI CEC in order to
use this function.
• We do not guarantee the all devices can be supported on
this unit.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 17 Monday, February 6, 2012 5:30 PM