Operation Manual

4
EN
4
INITIAL SETUP
This section will guide you through the unit's initial
setup which includes selecting a language for your on-
screen menu and auto scan, which automatically
scans and memorises viewable channels.
1 After making all the necessary connections, turns
on the unit using the main power switch, then
press .
2 Use ◄ / ► to select the location, then press OK.
3 Use ▲ / ▼ to select [OSD Language] , the n select
the language you want, using ◄ / ►.
4 Use ▲ / ▼ to select [Auto Tuning], then press
OK.
5 Use ▲ / ▼ to select [Country], then select the
country you want, using ◄ / ►.
6 Use ▲ / ▼ to select [Tune type], then select
[DTV], [ATV] or both channel, using ◄ / ►.
7 Press OK to start scanning.
• Select [Home Mode], this unit is set to maximise the energy
efficiency for home setting and it can be adjusted through a
choice of picture and sound quality according to your
preference.
• Select [Retail Mode], this unit will be set up with predefined
setting for retail displays.
• If you select [Retail Mode], the confirm message will
appear.
• Scan confirmation menu will appear.
• If you press MENU during channel scanning, this operation
will be paused, then press MENU again to exit the initial
setup.
OK
First Time Installation
Home Mode
English
OSD Language
Auto Tuning
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 4 Monday, February 6, 2012 5:30 PM