Operation Manual

6
EN
6
Sound Select
For Digital TV operation
Press AUDIO to display currently selected audio
language with the number of available ones and press
repeatedly to cycle through them.
For Analogue TV operation
Press AUDIO to display currently selected audio mode
and press repeatedly to cycle through the available
audio mode.
(e.g.)
Sleep Timer
The sleep timer can be set the unit to go to the standby
mode after an incremental period of time.
1 Press SLEEP repeatedly to change the sleep
time period.
Subtitle Settings
You can change the subtitle settings used for TV
programmes.
1 Press (Subtitle) repeatedly to change the
subtitle language.
Teletext Settings
You can change the teletext settings used for TV
programmes.
1 Press (Text) to turn on the teletext decoder.
2 Press (Text) repeatedly to show the teletext in
transparent mode.
3 Press EXIT to turn off the teletext decoder.
Switching the Input Mode
You can switch the input mode to TV mode or external
input mode.
1 Press SOURCE .
2 Use ▲ / ▼ to select the input mode you want,
then press OK.
:
Dolby Digital sound
:
Dolby Digital Plus sound
:
HE-AAC sound
no icon :
MPEG sound
NICAM STEREO Mono
NICAM MONO Mono
Stereo Mono
DUAL I DUAL II
Mono
• Each time you press SLEEP, the timer increases from
10 minutes up to 240 minutes.
• Press SLEEP repeatedly until [Off] appears to cancel the
sleep timer.
• If the unit goes into standby mode, the sleep timer will be
cancelled.
NICAM DUAL I NICAM DUAL II Mono
• To enlarge fonts, press .
• To select the teletext subpages, press .
• To directly select the page numbers shown at the bottom of
the TV screen, use RED / GREEN / YELLOW / BLUE.
• To call up the hidden information, press .
• To hold the current page, press .
• To go back to the start page, press .
• [Component] will be displayed if you connected
component video cables to this unit.
OK
HDMI2
HDMI1
SCART
Component
PC
AV
ATV
DTV
Media
Input Source
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 6 Monday, February 6, 2012 5:30 PM