LED LCD HD Television Instruction Manual English 46FD753P 39FL753P 32FL553P / 32FL553 29FL553P / 29FL553 24FL553P / 24FL553
Contents UNIT INFORMATION ...................................2 Trademark Information ..............................2 Servicing....................................................2 Cabinet Cleaning.......................................2 Panel Cleaning ..........................................2 Remote Control .........................................3 Control panel .............................................4 Terminal ....................................................5 INITIAL SETUP ....................
Remote Control 1 2 10. 13 14 15 12. 13. 3 16 4 11. 14. 17 15. 5 6 7 8 18 9 19 16. 17. 18. 10 11 (Mute) Turn off the sound. Refer to “To adjust the volume” (p. 7). RED / GREEN / YELLOW / BLUE Use for “EPG(Electronic Programme Guide)” (p. 7) / “[Programme Edit]” (p. 16). DISPLAY Displays the channel number or input source. SOURCE Switch the input source mode. Refer to “Switching the Input Source Mode” (p. 9). PICTURE MODE Change the picture mode. Refer to “[Picture Mode]” (p. 18).
Control panel This window has no function. 39FL753P/32FL553P/32FL553/ 29FL553P/29FL553/24FL553P/24FL553 1. 2. 3. 1 3 4 2 5 6 4. 7 46FD753P 5. 6. Keys on Rear. Control Keys are located on the Rear side of the TV. Standby / Power indicator (Power on : no light, Standby : red) Infrared sensor window Receive the infrared rays transmitted from the remote control. VOL Ż / Ź • Watching TV, VOL Ż / Ź on the front panel works the same function as / . Refer to “9. / ” (p. 3).
Terminal 1. 2. 3. 4. 5. 6. 7. 39FL753P/32FL553P/32FL553/ 29FL553P/29FL553/24FL553P/24FL553 8. 9. AC power cord inlet HDMI (HDMI 1 / HDMI 2) input jacks Coaxial digital audio output jack (Aerial) input jack Headphone audio output jack SCART jack Component video, Composite video and Audio (L/R) input jacks CI slot USB terminal (p. 10, 11) • Data input from USB flash memory only. 1 3 2 • User should not connect any devices to the USB terminal such as digital camera, keyboard, mouse, etc.
INITIAL SETUP • When scanning starts, confirmation menu will appear. This section will guide you through the unit's initial setup which includes selecting a language for your onscreen menu and auto scan, which automatically scans and memorises viewable channels. 1 After making all the necessary connections, turn on the unit pressing Home Mode OSD Language English Germany Country Auto Tuning Use Ż / Ź to select the location. • If you select [Retail Mode], the confirm message will appear.
OPERATIONS EPG(Electronic Programme Guide) Read this first These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Watching a TV Programme For Digital TV operation You can easily find a channel or see the detailed channel information. EPG gives you scheduled information of the TV programme. 1 Press EPG to display [PROGRAMME GUIDE] menu and use Ÿ / ź to select a channel.
Sleep Timer Subtitle Settings The sleep timer can be set the unit to go to the standby mode after an incremental period of time. 1 Press SLEEP repeatedly to change the sleep time period. You can change the subtitle settings used for TV programmes. 1 Press (Subtitle) to display the subtitle language list. • Available options are; Off / 10min / 20min / 30min / 60min / 90min / 120min / 180min / 240min. 2 Use Ÿ / ź to select the subtitle language you want, then press OK.
Switching the Input Source Mode SmartConnect You can switch the input source mode to TV mode or external input mode. This unit can display the screen of other device with MHL function and use the remote control of this unit to operate it. During the connection, the device is charged up. 1 Press SOURCE 2 Use Ÿ / ź to select the input mode you want, then press OK. .
Recording Playback This unit can record a TV programme. Use a USB flash memory for saving the data. 2 Press 3 Use Ÿ / ź to select the desired file, then press OK to start the playback. Setup for Recording / Playback (Index) to call up the recorded list. You must connect the USB flash memory to USB terminal of this unit (shown below).
Photo / Music / Video Playback Note for Playback This unit can play picture, music and video files. Use the USB flash memory that contains the files. • You can check Multimedia Specification. Refer to “Multimedia Format” (p. 32). Setup for Playback You must connect the USB flash memory to USB terminal of this unit (shown below). • The USB flash memory is not supplied with this unit. • The unit recognise a USB flash memory only.
[PHOTO] 2 Use Ż / Ź to select [PHOTO], then press OK. Operation in Slideshow OK / DISPLAY : Press to display the menu. [Repeat]: Use Ż / Ź to select [Repeat] and press OK to switch the repeat mode: [Repeat None], [Repeat 1] and [Repeat All] in order. USB 2.0 [Music]: PHOTO MUSIC Use Ż / Ź to select [Music] and press OK to play the music file in the same folder. MOVIE [Rotate](right-handed or left-handed rotate): 3 Use Ż / Ź to select [C], then press OK to enter the file.
[MUSIC] 2 Use Ż / Ź to select [MUSIC], then press OK. Operation in Playback OK / DISPLAY : Press to display the menu. [Repeat]: Use Ż / Ź to select [Repeat] and press OK to switch the repeat mode: [Repeat None], [Repeat 1] and [Repeat All] in order. USB 2.0 [MUTE]: PHOTO MUSIC Use Ż / Ź to select [MUTE] and press OK. MOVIE [Playlist]: 3 Use Ż / Ź to select [C], then press OK to enter the file. Use Ż / Ź to select [Playlist] and press OK to display the playlist. [Info.]: Use Ż / Ź to select [Info.
[MOVIE] 2 Use Ż / Ź to select [MOVIE], then press OK. Operation in Playback OK / DISPLAY : Press to display the menu. [Repeat]: Use Ż / Ź to select [Repeat] and press OK to switch the repeat mode: [Repeat None], [Repeat 1] and [Repeat All] in order. USB 2.0 A-B Repeat: PHOTO 3 MUSIC Use Ż / Ź to select A-B Repeat and press OK to switch the limited repeat mode: [Set A], [Set B] and [None] in order. MOVIE Use Ż / Ź to select [C], then press OK to enter the file.
OTHER SETTINGS • When scanning starts, confirmation menu will appear. Read this first • To turn back previous page, pressing MENU button in [Auto Tuning] menu. Before adjust each setting, press MENU to display the menu. To exit the menu, press MENU. Some settings need to enter PIN code. Refer to “Lock Settings” (p. 21). Channel Settings You can edit the channel settings. 1 Use Ż / Ź to select [CHANNEL].
[DTV Manual Tuning] [Programme Edit] For Digital TV operation You can search DTV channel manually in your area. For Digital TV operation You can edit the programme settings. 2 Use Ÿ / ź to select [DTV Manual Tuning], then press OK. • If you set [Lock System] to [On], you have to enter the 6digit PIN code you set using the Number buttons. 3 Use Ż / Ź to select the channel you want, then press OK to start scanning.
[Schedule List] [Signal Information] For Digital TV operation You can see the detailed channel information and reserve TV programme. For Digital TV operation You can see the detail information about the signal. 2 2 Use Ÿ / ź to select [Schedule List], then press OK to display the list. Use Ÿ / ź to select [Signal Information], then press OK to display the detail. Signal Information Channel: 21 (474.
PC Settings Picture Adjustment You can adjust the PC screen position, size and phase. You can adjust the picture settings according to your personal preference. These settings are automatically stored after exiting the picture menu. 1 Use Ż / Ź to select [PICTURE]. Before you begin You must connect your PC to this unit and select [PC] at [Input Source]. Refer to “Switching the Input Source Mode” (p. 9). 1 Use Ż / Ź to select [SCREEN].
[Contrast] / [Brightness] / [Colour] / [Tint] / [Sharpness] Each setting can be adjusted manually. [Contrast] : contrast adjustment Sound Adjustment You can adjust the sound settings according to your personal preferences. 1 Use Ż / Ź to select [SOUND].
[Treble] / [Bass] / [Balance] Time Settings You can set left / right speaker setting. You can change Time setting. 1 Use Ż / Ź to select [TIME]. [Treble] : high pitched tone adjustment [Bass] : low pitched tone adjustment [Balance] 2 : volume balance setting for left and right speakers Use Ÿ / ź to select the item you want, then press OK, and then appear the setting display, adjust the setting, using Ż / Ź. • You can adjust [Treble] and [Bass] settings, if you set [Personal] in [Sound Mode].
[Sleep Timer] Lock Settings The sleep timer can be set the unit to go to the standby mode after an incremental period of time. You can set following lock settings. 2 Use Ÿ / ź to select [Sleep Timer], then press OK. 3 Use Ÿ / ź to select the time you want, then press OK. Before you change the lock settings You must remember your own PIN code. Every lock settings need PIN code. 1 Use Ż / Ź to select [LOCK]. • You can set also SLEEP button on Remote Control, refer to “Sleep Timer” (p. 8).
[Set Password] [Parental Guidance] You can set your own PIN code. You can set the parental rating to avoid watching an inappropriate programme for your children. 2 Use Ÿ / ź to select [Set Password], then press OK. Please enter old password Please enter new password Confirm new password Clear Cancel 2 Use Ÿ / ź to select [Parental Guidance], then press OK. 3 Use Ÿ / ź to select the age restriction, then press OK. [Key Lock] You can set [Key Lock] and unlock with PIN code.
Setup Adjustment [Audio Languages] You can change other setting. 1 Use Ż / Ź to select [SETUP]. You can select the preferred audio language. 2 Use Ÿ / ź to select [Audio Languages], then press OK. 3 Use Ÿ / ź / Ż / Ź to select the language you want, then press OK. OSD Language TT Language Audio Languages Subtitle Language SETUP Hearing Impaired Off PVR File System Aspect Ratio 16:9 [Subtitle Language] First Time Installation Reset You can select the preferred subtitle language.
[Aspect Ratio] For 4:3 video signal Display modes can be selected when your TV receives a 16:9 or 4:3 video signal. Three types of display modes can be selected for a PC Input signal. 2 Use Ÿ / ź to select [Aspect Ratio], then press OK. 3 Use Ÿ / ź to select the TV screen display mode you want, then press OK. [Auto]* [4:3] [16:9] [Full Screen]* [Zoom2] [Zoom1] • You cannot set screen display mode in playback mode.
[First Time Installation] [HDMI CEC] You can set initial setup again. Refer to “INITIAL SETUP” (p. 6). This function allows you to operate the linked functions between devices with HDMI CEC feature and this unit connecting through an HDMI cable. 2 Use Ÿ / ź to select [First Time Installation], then press OK. 3 Follow steps 2 to 10 in “INITIAL SETUP” (p. 6). [Reset] You can restore the all settings except channel setting and parental lock settings. 2 Use Ÿ / ź to select [Reset], then press OK.
Hotel Mode Settings [Source Lock] You must enter [Lock System] due to proceed Hotel Mode setting. For details, refer to “Lock Settings” (p. 21). 1 Use Ż / Ź to select [LOCK]. You can lock the source one by one. If you set to [On], the source does not appear on the display. 2 Use Ÿ / ź to select [Lock System], then press OK. Lock System 5 Use Ÿ / ź to select [Source Lock], then press OK. 6 Use Ÿ / ź to select the source you want, then press OK to set to [On].
[Max Volume] You can set maximum limit of audio volume. 5 Use Ÿ / ź to select [Max Volume], then press Ż / Ź to adjust the audio volume. • If you set to [On] in [Lock System], you cannot turn the volume up over setup volume. [Import Database] You can import the Hotel Mode settings from USB flash memory. 5 Use Ÿ / ź to select [Import Database], then press OK. • After importing, the unit will go into the standby mode automatically. • If a USB flash memory does not insert, an error message will appear.
TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save you time and money. Problem Possible Remedy Remote control does not work Bars on TV screen • Is unit plugged in? • Power at outlet? • Check batteries in remote control. • If outside antenna is being used, check for broken wire. • Check for local interference.
Problem Black or luminous point on TV screen Possible Remedy • It is quality of the LCD Panel.
SPECIFICATIONS 46.0 inches / 116.80cm (46FD753P) 38.6 inches / 98.04cm (39FL753P) Panel size 31.5 inches / 80.01cm (32FL553P, 32FL553) 28.5 inches / 72.39cm (29FL553P, 29FL553) 23.6 inches / 59.94cm (24FL553P, 24FL553) Television system DVB-T/C(MPEG2/MPEG4-H.
USB terminal USB × 1 Common Interface CI slot × 1 H: 657.5 mm / W: 1088.8 mm / D: 122.0 mm (46FD753P) Dimensions without base H: 542.0 mm / W: 912.0 mm / D: 60.0 mm (39FL753P) H: 451.5 mm / W: 754.6 mm / D: 57.0 mm (32FL553P, 32FL553) H: 412.0 mm / W: 686.5 mm / D: 57.0 mm (29FL553P, 29FL553) H: 350.8 mm / W: 576.9 mm / D: 53.7 mm (24FL553P, 24FL553) H: 707.9 mm / W: 1088.8 mm / D: 270.3 mm (46FD753P) Dimensions with base H: 587.5 mm / W: 912.0 mm / D: 214.0 mm (39FL753P) H: 494.7 mm / W: 754.
Input Resolution • HD models: 32FL553P/32FL553/29FL553P/29FL553/24FL553P/24FL553 • Full HD models: 46FL753P/39FL753P YPbPr IN (Component video) Resolution PC(VGA) IN HD models Resolution Refresh rate PC(VGA) IN Full HD models Resolution Refresh rate 480i/p 576i/p 720p 640 x 480 720 x 400 800 x 600 60Hz / 72Hz / 75Hz 70Hz 60Hz / 72Hz / 75Hz 1080i 1024 x 768 HDMI Resolution Refresh rate 1280 x 768 480i/p 576i/p 720p 1080i/p 1080p 60Hz 50Hz 50Hz / 60Hz 50Hz / 60Hz 24Hz 640 x 480 720 x 400 800 x 600
A39Q1EP/A33T1EP/A33F1EP/A33F0EP/A33M1EP/A33M0EP/A33L1EP/A33L0EP ★★★★★