Operation Manual

GettingStarted
English6
SwitchingOn/Off
ToSwitchtheTVOn
Connectthepowercordtothe220240VAC,50Hz.
ToswitchontheTVfromstandbymodeeither:
Pressthe“
”button,P+/Poranumericbuttonon
theremotecontrol.
PressthesidefunctionswitchuntiltheTVcomeson
fromstandby.
ToSwitchtheTVOff
Pressthe“ “buttonontheremotecontrolorpress
the side function switch until the TV switches into
standbymode.
To power down the TV completely, unplug the
powercordfromthemainssocket.
Note:WhentheTVisswitchedtostandbymode,thestandby
LED can blink to indicate that features such as Standby
Search,OverAirDownloadorTimerisactive.TheLEDcan
alsoblinkwhenyouswitchontheTVfromstandbymode.
FirstTimeInstallation
When turned on for the first time, the language
selection screen is displayed. Select the desired
languageandpressOK.
The First Time Installation (FTI) screen will be
displayed next. Set your preferences using the
9,A42,?4:9-@??:9> ,9/B309 J94>30/;=0>> " ?:
continue.
YoucanactivateStoremodeoptiontobeavailable
in“Othersettings”menuandyourTV’sfeatureswill
-0477@>?=,?0/:9?30?:;:1?30>.=009.:9J=8,?4:9
screenwillbedisplayed.SelectYEStoproceed.
If Home Mode is selected, Store mode will not be
availableaftertheFirstTimeInstallation.PressOK
buttontocontinue.
DefaultPINcode canchangedepending onthe
selectedcountry.
Ifyou areasked toentera PINcode forviewing a
menuoption,useoneofthefollowingcodes:4725,
0000or1234.
AerialInstallation
IfyouselectAERIALoptionfromtheSearchType
screen,thetelevisionwillsearchfordigitalterrestrial
TVbroadcasts.
NOTE:YoucanpressMENUbuttontocancel.
Afteralltheavailablestationsarestored,theChannel
Listwillbedisplayedonthescreen.Ifyoulikehowthe
channelsaresortedaccordingtotheLCN(*),please
select“Yes”andthanpressOK.
PressMENUbuttontoquitchannellistandwatchTV.
(*)LCNistheLogicalChannelNumbersystemthat
organizesavailablebroadcastsinaccordancewitha
recognizablechannelsequence(ifavailable).
CableInstallation
IfyouselectCABLEoptionandpressOKbuttonon
theremotecontrol.Tocontinue,pleaseselectYES
andpressOK.Tocanceloperation, selectNOand
press OK. You can select frequency ranges from
thisscreen.
Enter the frequency range manually by using the
numericbutton.
Note: Searching duration will change depending on the
selectedsearchstep.
SatelliteInstallation
IfyouselectSatelliteoptionfromtheSearchType
screen,youcansetasatelliteandwatchthesatellite
channels. When you select Satellite installation,
AntennaTypemenuwillbedisplayed.
Therearethreetypesofantennaselection.Youcan
selectAntennatypeasDirect,UnicableorDiSEqC
switchbyusing“
”or“ ”buttons.
Direct: If you have a single receiver and a direct
satellitedish, selectthis antenna type.Afterselecting
Direct,anothermenuscreenwillbedisplayed.Select
anavailablesatelliteandpressOKtoscanforservices.
Unicable: If you have multiple receivers and a
unicablesystem,selectthisantennatype.PressOKto
.:9?49@0:9J2@=0>0??492>-D1:77:B49249>?=@.?4:9>
onthescreen.PressOKtoscanforservices.
DiSEqCswitch:Ifyouhavemultiplesatellitedishes
andaDiSEqCswitch,selectthisantennatype.After
selectingDiSEqCswitch,anothermenuscreenwill
be displayed. You can set four DiSEqC options (if
available).PressGREENbuttontoscanallsatellites
orpressYELLOWbuttontoscanonlythehighlighted
satellite.TosaveandexitpressOKbutton.
FirstTimeInstallationUSBConnections
6 32FDV5714