Operation Manual

18
Channel Settings
You can edit the channel settings.
1 Use Ż / Ź to select [CHANNEL].
[Auto Tuning]
You can scan the channels in your area automatically.
2 Use Ÿ / ź to select [Auto Tuning], then press
OK to start scanning.
[ATV Manual Tuning]
You can search channels manually in your area.
2 Use Ÿ / ź to select [ATV Manual Tuning], then
press OK.
3 Use Ÿ / ź to select [Current CH], then use Ż /
Ź to select the channel you want.
4 Use Ÿ / ź to select [Color System], then use Ż
/ Ź to select the system you want.
5 Use Ÿ / ź to select [Sound System], then use
Ż / Ź to select the system you want.
6 Use Ÿ / ź to select [Fine Tune], then use Ż / Ź
to adjust the setting.
7 Use Ÿ / ź to select [AFC], then use Ż / Ź to
select [On] or [Off].
8 Use Ÿ / ź to select [Search], then use Ż / Ź to
search a channel.
[Programme Edit]
You can edit the programme settings.
2 Use Ÿ / ź to select [Programme Edit], then
press OK to enter Programme Edit list.
Screen Settings
You can edit the screen settings in PC mode.
1 Use Ż / Ź to select [SCREEN].
[Auto Adjust]
You can change the screen settings automatically.
2 Use Ÿ / ź to select [Auto Adjust], then press
OK.
DETAIL SETTINGS
Read this first
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press EXIT.
• When the scanning is completed, the lowest memorised
analogue channel will be displayed.
• If you press MENU during the scanning, this operation will
be stopped and a confirmation display will appear, then you
can cancel scanning.
Move SelectMenu Exit
Auto Tuning
ATV Manual Tuning
Programme Edit
CHANNEL
• If you set to [On], this unit searches a near channel
automatically.
[Delete] (RED) :
Press RED to delete the current channel.
[Rename] (GREEN) :
Press GREEN and use Ÿ / ź / Ż / Ź to change the
current channel name.
[Move] (YELLOW) :
Press YELLOW and use Ÿ / ź to move the current
channel.
[Skip] (BLUE) :
Press BLUE to skip the current channel.
[FAV] (FAV) :
Press FAV to register the current channel.
Move SelectMenu Exit
Auto Adjust
H-Offset
V-Offset
Clock
Phase
SCREEN
30
30
30
0