Operation Manual

9
EN
It is supported that files to be played back in this unit
are recorded under the following specifications:
PC Format
The following signals can be displayed.
• Funai cannot be held responsible if your USB flash memory
is not supported, nor will Funai accept any liability for
damage or loss of stored data.
• A USB flash memory that required its own driver or the
device with a special system such as fingerprint recognition
are not supported.
• Be sure to keep a backup copy of the original files on your
device before you play them back on this unit. We have no
responsibilities for damage or loss of your stored data.
• To avoid damaging the USB flash memory and the unit
always turn off the unit before you remove the USB flash
memory.
• This unit is not allowed to use the USB flash memory which
requires external power supply (500 mA or more).
• This unit can be recognised up to 60,000 files in the USB
flash memory.
• This unit may not be recognised if the length of the file
names is too long. Only English characters can be
recognised.
• This unit does not support MTP(Media Transfer Protocol) or
the file other than FAT, FAT32 and NTFS file system. If the
file is not supported, error message appears.
• When the unit does not recognise the USB flash memory,
try reconnecting it.
• This unit cannot play back a file which go over the limit of
file restriction.
JPEG :
Baseline 8,192 x 8,192
Progressive 1,024 x 768
Format Resolution Refresh rate
VGA
720 x 400 70Hz
640 x 480
60Hz
72Hz
75Hz
SVGA
800 x 600
60Hz
72Hz
75Hz
XGA
1,024 x 768
60Hz
70Hz
75Hz
SXGA
1,280 x 768 60Hz
WXGA
1,360 x 768 60Hz
• Other formats or non-standard signals will not be displayed
correctly.
• Please use the VGA cable that has a ferrite core.
A23FA_F0_AA_A0_7A_70EP_Web_EN.fm Page 9 Monday, February 6, 2012 5:30 PM