Operation Manual

25
EN
[First Time Installation]
You can set initial setup again. Refer to “INITIAL
SETUP” (p. 6).
2 Use Ÿ / ź to select [First Time Installation],
then press OK.
3 Follow steps 2 to 10 in “INITIAL SETUP” (p. 6).
[Reset]
You can restore the all settings except channel setting
and parental lock settings.
2 Use Ÿ / ź to select [Reset], then press OK.
3 Press Ż to select [Yes] to reset to default
settings.
[Software Update(USB)]
It is available to update software using USB.
2 Use Ÿ / ź to select [Software Update(USB)],
then press OK.
[HDMI CEC]
This function allows you to operate the linked functions
between devices with HDMI CEC feature and this unit
connecting through an HDMI cable.
[HDMI CEC]
If you set to [On], HDMI CEC function allows your
device to act in conjunction with this unit.
2 Use Ÿ / ź to select [HDMI CEC], and then
select [On] or [Off], using Ż / Ź.
[Auto Power]
If you set to [On], when your device turns on, this
unit also turns on automatically.
2 Use Ÿ / ź to select [Auto Power], and then
select [On] or [Off], using Ż / Ź.
[Device Menu]
You can see the device title menu of your device.
2 Use Ÿ / ź to select [Device Menu], then
press OK to display the detail.
• After you select [Yes], the unit go into standby and turns on
automatically.
• Your device must be compatible with HDMI CEC in order to
use this function.
• We do not guarantee the all devices can be supported on
this unit.