Operation Manual

8
EN
Sleep Timer
The sleep timer can be set the unit to go to the standby
mode after an incremental period of time.
1 Press SLEEP repeatedly to change the sleep
time period.
Sound Select
For Digital TV operation
Press AUDIO to display currently selected audio
language with the number of available ones and press
repeatedly to cycle through them.
For Analogue TV operation
Press AUDIO to display currently selected audio mode
and press repeatedly to cycle through the available
audio mode.
(e.g.)
Subtitle Settings
You can change the subtitle settings used for TV
programmes.
1 Press (Subtitle) to display the subtitle
language list.
2 Use Ÿ / ź to select the subtitle language you
want, then press OK.
Teletext Settings
You can change the teletext settings used for TV
programmes.
1 Press (Text) to turn on the teletext decoder.
2 Press (Text) repeatedly to show the teletext in
transparent mode.
3 Press EXIT to turn off the teletext decoder.
• Available options are; Off / 10min / 20min / 30min / 60min /
90min / 120min / 180min / 240min.
• Press SLEEP repeatedly until [Off] appears to cancel the
sleep timer.
• If the unit goes into standby mode, the sleep timer will be
cancelled.
Dolby D : Dolby Digital sound
Dolby D+ : Dolby Digital Plus sound
AAC : HE-AAC sound
MPEG : MPEG sound
NICAM STEREO Mono
[NICAM DUAL I NICAM DUAL II Mono
NICAM MONO Mono
Stereo Mono
DUAL I DUAL II
Mono
• To enlarge fonts, press .
• To select the teletext subpages, press .
• To directly select the page numbers shown at the bottom of
the TV screen, use RED / GREEN / YELLOW / BLUE.
• To call up the hidden information, press .
• To hold the current page, press .
• To go back to the start page, press .